Before hanging the wallpaper

Please check the delivery, particularly the lengths, reference and color and if it corresponds to your order.
If a defect is noticed, do not cut the rolls.
No complaints will be accepted if the rolls are cut or applied..

Apply the wallpaper

The wall must be prepared  (fill any holes or cracks) dry, solid and free of dust.
Draw a vertical line with a level or a laser level, and use it as a guide to place the edge of the wallpaper.

Apply the paste on the wall

Use a special adhesive for wall textiles and glass-textile fabrics for a normally absorbent wall and follow the manufacture instructions.
 

Apply the paste with a roll or a paste brush on the wall, covering the whole surface of the first drop, up to the vertical line.
No need to cut the the drop, just take the beginning of the roll +5cm right to the top of the wall.

Apply the wallpaper on the wall

Apply the wallpaper on the wall and following the vertical line with the edge of the wallcovering

Eliminate air bubbles with a smooth brush from the center to the edges.

Cut the extra wallpaper with a cutter, at the top and the bottom of the wall.

Repeat the steps for the next lines of wallpaper