Before applying the wallpaper
Always check the wallpaper: length, reference, color or any visible defect.
If any of the wallpaper features are not in accordance with your order do not cut or apply the wallpaper.
Elitis doesn't accept claims after cutting or attaching the wallpaper.
Prepare the wall
The wall must be perfectly clean and dry, without imperfections or irregularities.
Draw a vertical line with a level or a laser level, and use it as a guide to place the edge of the wallpaper.
Apply the paste on the wall
Use a special adhesive for wall textiles and glass-textile fabrics for a normally absorbent wall and follow the manufacture instructions.
Apply the paste with a roll or a paste brush on the wall, covering the whole surface of the first drop, up to the vertical line.
Apply the wallpaper on the wall
Apply the wallpaper on the wall and following the vertical line with the edge of the wallpaper.
Eliminate all air bubbles with a smooth brush form the center to the edges.
Cut the extra wallpaper with a cutter, at the top and the bottom of the wall.
Do the same for the following stripes of wallpaper.